.514/.544 224/230@112 WILL THIS WORK?
#11
RE: .514/.544 224/230@112 WILL THIS WORK?
what would be a bad a$$ cam for my car?
ORIGINAL: vfast
sounds like a mess....return all that stuff..use the 1.6 rocker and find a cam for 1.6's no custom cam needed
sounds like a mess....return all that stuff..use the 1.6 rocker and find a cam for 1.6's no custom cam needed
#13
RE: .514/.544 224/230@112 WILL THIS WORK?
heads and pistons are good...maybe it's not my lift? maybe duration? here's the meat and potatoes of the motor dss pro bullet
afr185's rpm upper/lower accufab 70mm...t -body pro-m 75mass then all your basic bolt ons.the cam is good it made the power i wanted now i just want more!! maybe it is blower time?
afr185's rpm upper/lower accufab 70mm...t -body pro-m 75mass then all your basic bolt ons.the cam is good it made the power i wanted now i just want more!! maybe it is blower time?
#15
RE: .514/.544 224/230@112 WILL THIS WORK?
it weighs 3000lbs with a 1/4 tank. i think i need to get a lighter driver(215lbs) yeah i thought about juice. car is plenty quick as it is.
all i need to add is a timing adjuster outside of bottle,purge,warmer,ect.
all i need to add is a timing adjuster outside of bottle,purge,warmer,ect.
#17
RE: .514/.544 224/230@112 WILL THIS WORK?
no by itself the lakewood bellhousing added like 50lbs,subframes added18lbs,red top battery added like 8,added another electric fan,5lbs....car seats with drivers added 45,and 22lbs!j/k i'm using a F.S. scale so it might be off?
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
Steeda Autosports
0
09-01-2015 08:16 PM