bbfao

i have an 88 hatch thats stock for now. its going in the garage in 2 weeks to get tore up!!!!!!!!! the mods will be a trick flow top end, underdrive pulleys, 40 lb injectors, a mass air conversion, a 255 lph fuel pump, 3:73's in an eaton, frame conectors, 75mm tb, new h-pipe with flowmasters dumping off, and a new clutch (undecided), and the icing on the cake is going to be either a procharger or kenne belle sc!!!!! with all of this on a new 347 short block from ford racing

luckythirteen13

probably high 11's

SchoolBoy

The only thing I can find wrong with that list is I belive you can't run underdrive pulley's with a s/c?

rsw007

10's if you can drive. i have a friend with a 331 n/a car running 10.90's weighing in at a mere 2700lbs car & driver.

fordguy17

come on, a h/c/i 347 with a supercharger?

86HOGT

Yeah I don't think you can run under drive pullies an a KB.

88BlueGT

If you tried hard enough and got a 347 to hook you can take it to the 10's all motor. Ive seen it done plenty of times. And with a blower?!?! I dont think I need to say anymore...

stanglx2002

you shouldnt have any problems getting into the 11's with that combo as long as you have a good suspension that you can hook up on bc without a good suspension you have nothing

luckythirteen13

its a good set up, just need traction and to drive it hard and youll be fine

vfast

it won't go anywhere........................y see below














































because they don't make 40# injectors and they would be way too big..the car might not even start