how to put a chevy 350 in a stang
#14
RE: how to put a chevy 350 in a stang
IF any of you guys had a damn clue you would know that there are kits out there to do this very thing and even without a kit it's pretty easy. The guy came here and asked for our help and all you ******** do is flame him, that is not acceptible in the tech sections. If it was in off topic thats one thing but flaming is not in the tech areas, so if you don't have anything constructive to add KEEP YOUR MOUTH SHUT.
Here is good link
http://www.voy.com/189349/
Just so of you know SBD with 4 bolt mains are cheap and don't split at 500 hp like the 5.0 does (actually neither do the 2 bolt blocks). Also 383 stroker kits are dirt cheap for chevy motors. If the guy can get one for free and has a crappy 4 cyl in there now, this swap makes sence.
Here is good link
http://www.voy.com/189349/
Just so of you know SBD with 4 bolt mains are cheap and don't split at 500 hp like the 5.0 does (actually neither do the 2 bolt blocks). Also 383 stroker kits are dirt cheap for chevy motors. If the guy can get one for free and has a crappy 4 cyl in there now, this swap makes sence.
#15
RE: how to put a chevy 350 in a stang
ORIGINAL: JD1969
IF any of you guys had a damn clue you would know that there are kits out there to do this very thing and even without a kit it's pretty easy. The guy came here and asked for our help and all you ******** do is flame him, that is not acceptible in the tech sections. If it was in off topic thats one thing but flaming is not in the tech areas, so if you don't have anything constructive to add KEEP YOUR MOUTH SHUT.
Here is good link
http://www.voy.com/189349/
Just so of you know SBD with 4 bolt mains are cheap and don't split at 500 hp like the 5.0 does (actually neither do the 2 bolt blocks). Also 383 stroker kits are dirt cheap for chevy motors. If the guy can get one for free and has a crappy 4 cyl in there now, this swap makes sence.
IF any of you guys had a damn clue you would know that there are kits out there to do this very thing and even without a kit it's pretty easy. The guy came here and asked for our help and all you ******** do is flame him, that is not acceptible in the tech sections. If it was in off topic thats one thing but flaming is not in the tech areas, so if you don't have anything constructive to add KEEP YOUR MOUTH SHUT.
Here is good link
http://www.voy.com/189349/
Just so of you know SBD with 4 bolt mains are cheap and don't split at 500 hp like the 5.0 does (actually neither do the 2 bolt blocks). Also 383 stroker kits are dirt cheap for chevy motors. If the guy can get one for free and has a crappy 4 cyl in there now, this swap makes sence.
built ford tough with chevy stuff haha... i wouldn't do it, but in this case it makes sense. if you do a google search you will find tons of articles on this.
#16
RE: how to put a chevy 350 in a stang
Overall I think it'll cost you about the same to swap the Chevy engine vs a Ford. With that chevy you're definitely gonna need a new tranny, if you swap in a 5.0 or something, and don't beef it up or powershift, you should be fine with the 4cyl tranny in your car. At least for a while. I'm pretty sure you can get a used 302 for around $300 or so
#18
RE: how to put a chevy 350 in a stang
ORIGINAL: turbostang21
exactly....and this is why i don't consider mf a "tech" site, more of a shoot the sh#t site (which i admit is far more entertaining)
built ford tough with chevy stuff haha... i wouldn't do it, but in this case it makes sense. if you do a google search you will find tons of articles on this.
exactly....and this is why i don't consider mf a "tech" site, more of a shoot the sh#t site (which i admit is far more entertaining)
built ford tough with chevy stuff haha... i wouldn't do it, but in this case it makes sense. if you do a google search you will find tons of articles on this.
#19
RE: how to put a chevy 350 in a stang
i dunno what to say about this
best of luck with it. and for performance it better runs 11s NA righ off the bat if not its not worth the hassle in my eyes. but as for answerign your question it can be done and has. resale will be shot but if you dont care great but there will be some fabing involved.
best of luck with it. and for performance it better runs 11s NA righ off the bat if not its not worth the hassle in my eyes. but as for answerign your question it can be done and has. resale will be shot but if you dont care great but there will be some fabing involved.
#20
RE: how to put a chevy 350 in a stang
A friend I drag with did it. He runs a 90 gt with a chevy 383 stroker. The car is gutted and and runs consistant low 11's. He loves the mustang body but also loves chevy engines. He fabbed up the mounts and crossmember brace. You will probably have to get a custom length drive shaft. I am a ford guy all the way but he has been running the same setup for three years now and that 383 dont skip a beat.