help on 5-LUG CONVERSION
#1
help on 5-LUG CONVERSION
5-LUG CONVERSION
[/align][/align]I have a question.. I just finished putting on the rear axles that i took of an Aerostar van from an 86 to 97 on my 91 mustang but when i shake the car side to side i hear a knocking sounds coming from the rear end... I was hoping if you guys could tell me what that is.... Maybe i did something wrong....Please let em know..[/align]
[/align][/align]I have a question.. I just finished putting on the rear axles that i took of an Aerostar van from an 86 to 97 on my 91 mustang but when i shake the car side to side i hear a knocking sounds coming from the rear end... I was hoping if you guys could tell me what that is.... Maybe i did something wrong....Please let em know..[/align]
#3
RE: help on 5-LUG CONVERSION
From an Aerostar you will need two of the passenger side axles from an 86 to 97 model.
you will need to get both from the passenger side ONLY! because the rear axles are offset so only the right side will work.
you will need to get both from the passenger side ONLY! because the rear axles are offset so only the right side will work.
#7
RE: help on 5-LUG CONVERSION
There is a slight amount of play you can feel/hear when shaking the car from side to side. With the car on jackstands, you should be able to move the axles in and out about an 1/8th of and inch give or take a 1/16th, that is normal
Thread
Thread Starter
Forum
Replies
Last Post
HRnB
GT350 S550 Tech
10
12-18-2015 09:35 AM
MustangForums Editor
Mustang News, Concepts, Rumors & Discussion
3
11-10-2015 11:39 AM
YoungStangsMan
5.0L (1979-1995) Mustang
15
09-05-2015 07:01 PM