What's the part called?
Thread Starter
3rd Gear Member
Joined: May 2007
Posts: 766
From: Kansas
What's the part called?
The one on the very back of the transmission that has the hole for the shaft? It appears to be pressed into place. I leak a bit of fluid from there and want to replace it before I put it on the engine and get it back in.
Thread Starter
3rd Gear Member
Joined: May 2007
Posts: 766
From: Kansas
RE: What's the part called?
ORIGINAL: mjr46
you mean the tailshaft seal???
you mean the tailshaft seal???
Thanks a lot though, now I know what to say when I go buy a new one!
Yukon Cornelius
Joined: Oct 2005
Posts: 11,812
From: deep in the heart of dixie GEORGIA
RE: What's the part called?
yeah it easy to do just jack the car up your gonna need a 12mm 12point to get the driveshaft bolts out then pull the shaft out of the tranny, the seal will pop out with a screwdriver or prybar etc then you just tap the new one in place evenly
Thread Starter
3rd Gear Member
Joined: May 2007
Posts: 766
From: Kansas
RE: What's the part called?
ORIGINAL: rmodel65
yeah it easy to do just jack the car up your gonna need a 12mm 12point to get the driveshaft bolts out then pull the shaft out of the tranny, the seal will pop out with a screwdriver or prybar etc then you just tap the new one in place evenly
yeah it easy to do just jack the car up your gonna need a 12mm 12point to get the driveshaft bolts out then pull the shaft out of the tranny, the seal will pop out with a screwdriver or prybar etc then you just tap the new one in place evenly
Got the engine rebuilt and I'm gettin it nice before I put it in.
Thread
Thread Starter
Forum
Replies
Last Post
AMAlexLazarus
AmericanMuscle.com
21
Apr 4, 2020 02:16 PM