5.0L General Discussion This section is for non-tech specific information pertaining to 5.0L Mustangs.

RACE!

Thread Tools
 
Search this Thread
 
Old Nov 22, 2008 | 08:45 AM
  #11  
Milton's Avatar
Milton
3rd Gear Member
 
Joined: Jul 2007
Posts: 720
From: ontario
Default

Originally Posted by projectresto83
24lbs injectors are too big for stock heads. They are not needed until you upgrade to at least some GT40's, They are the cheapest route to go and can get you there. My gt 40 swap cost me about $300 to buy and install them.

The article in the mag
3.73's
shed some weight
exhaust
lower control arms
CAI
slicks
electric fan
bat relocate
and a couple of other tweaks and they went 12.91 at 103.7 on a completely stock motor (except the CAI, and a little change in the front acc bracket setup)
If the 150 shoot is a dry shot then upgrading injectors wouldnt be a bad idea
Old Nov 22, 2008 | 08:48 AM
  #12  
projectresto83's Avatar
projectresto83
M.A.D. Motorsports
 
Joined: Jul 2006
Posts: 8,014
From: Indiana
Default

Originally Posted by TexasHotrod
Where did you find GT40s for that price??
I bought them from a friend but you can get them at junk yards for that price or cheaper.
Old Nov 22, 2008 | 10:14 AM
  #13  
kweb288's Avatar
kweb288
5th Gear Member
 
Joined: Feb 2007
Posts: 3,736
From: St. Charles Il, and ISU
Default

Originally Posted by Milton
If the 150 shoot is a dry shot then upgrading injectors wouldnt be a bad idea
he will also need a fuel pump to! the stock one dies out around a 100 shot on a stock fox, and by this i mean it goes lean
Old Nov 22, 2008 | 01:05 PM
  #14  
racin66coupe's Avatar
racin66coupe
5th Gear Member
 
Joined: Dec 2007
Posts: 3,485
From: NH
Default

Originally Posted by TexasHotrod
but I have a race against a Buick grand national and there is no way i am going to lose to a ford hater!!
you may want to rethink that
Old Nov 22, 2008 | 08:15 PM
  #15  
TexasHotrod's Avatar
TexasHotrod
Thread Starter
1st Gear Member
 
Joined: Jun 2008
Posts: 76
From: Texas
Default

well I have about 4 months to build my car up
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
Florida Regional Chapter
0
Sep 30, 2015 08:04 PM
guitarman376
4.6L (1996-2004 Modular) Mustang
0
Sep 30, 2015 05:54 PM
MustangForums Editor
Mustang News, Concepts, Rumors & Discussion
1
Sep 29, 2015 03:23 PM
mungodrums
S550 2015-2023 Mustang
10
Sep 28, 2015 10:54 PM




All times are GMT -5. The time now is 10:02 PM.