Engine gasket set working with h/c/i???
03-10-2009, 02:43 PM
#1
3rd Gear Member
Thread Starter
Join Date: Nov 2008
Location: Canada
Posts: 741
Engine gasket set working with h/c/i???
Hey guys, well recently I pieced together an h/c/i for my '92 5.0l, so I'm gonna be needing all new gaskets. Will this Ford Racing set work http://store.summitracing.com/partde...5&autoview=sku with my ported gt40p's and Trickflow street upper/lower intake? Or do I have to get special gaskets for each individual thing? Thanks 
03-10-2009, 04:23 PM
#2
5th Gear Member
Join Date: Nov 2008
Location: SC
Posts: 2,401
It should work but I prefer to buy mine seperatly because of specific compressed head gasket and bore size. I have a preferance to the intake gaskets and valve cover gaskets. You shouldn't have any problems except the gasket between the upper and lower intake
03-10-2009, 09:41 PM
#5
3rd Gear Member
Thread Starter
Join Date: Nov 2008
Location: Canada
Posts: 741
Well I know that's the obvious but since taking into consideration that the intake is a direct replacement for the oem. Anyhow I looked up the matching gasket that summit suggests to go along with it and this is what i got http://store.summitracing.com/partde...?part=MRG-5835. It looks the exact same as the one in the ford racing set..
Last edited by cch; 03-10-2009 at 09:57 PM.
Thread
Thread Starter
Forum
Replies
Last Post
KEM Motorworks
5.0L (1979-1995) Mustang
20
08-14-2015 10:13 PM