02GT87

Im in the market for one and Ive read that 86-93 5.0's are a little different than the 94-95 5.0's I ran into this one by UPR will I have problems bolting this up without going to a muffler shop?

http://cgi.ebay.com/ebaymotors/FORD-...3A1|240%3A1318

AdderMk2

I tried fitting a SN-95 x pipe to a fox, and it just wasnt happening..

also, I tried a fox H pipe on an SN. and it didnt clear the crossmember

keep in mind, the SN-95 exhaust is 11/16" longer than the fox exhaust

02GT87

ah i see these bastards are tricking me lol

AdderMk2

11/16" can be made up at the catback... but I prefer to just buy the stuff that actually is made FOR my car

OnyxCobra

the thing with UPR is they offer the same X pipe for all 86-95 cars, so i'd call and ask them how come theirs works like that. It doesn't look like their x pipe has the adjustability of say a Dr Gas X.

02GT87

well ive read this one does fit our sn95 5.0's BUT there is something about an air hose tube ??? :/

NoGo95GT

I would get an H-pipe for our cars. IMO! Especially since your car has flows. Your car will make a loud rasp from 2000-3000rpm. It's cool for a little while....but it becomes old fast. But then again, it's your car; do what you want! Also, I thought you were selling your car?

Stella94GT

some brads have a metal tube to connect an emissions tube to it but its not needed. If the upr one doesnt have it, you can just cap it off or eliminate the system all together.