what to do
08-14-2009, 12:29 PM
#1
Thread Starter
Join Date: Aug 2009
Location: oregon
Posts: 4
what to do
i have a 91 vert 5.0 with a munched front end and a bad top and i have a 89 2.3 vert so what do i do do i take the front clip off the 89 and put it on my 91 and if i do that will the top go on the 91 from the 89 if not can i unbolt the whole vert frame and bolt it in my 91. or just put my 5.0 in the 89 if i do that i know the motor and tranny and drive line and rearend but what else like the brake system and fuel system and wiring and everything else and yes i have read some other posts but not sure about it both cars are efi and cant afford to go carb and my 5.0 hase a ton of stuff for the motor he used to kinda race it not serious but a lil any help would be great. hope not to make anyone made out here but i need help. osageprde@yahoo.com
08-15-2009, 12:43 PM
#8
Thread Starter
Join Date: Aug 2009
Location: oregon
Posts: 4
the front is pretty bad its up on the pass side about 2 inch's and over towards the driver side about 3 maybe 4 inch's if you go to the garage you can see it i have pics up ther she's called emme. and if any one out there has a top for a 90 -93 white or black let me know thank you
Last edited by moneywisher; 08-15-2009 at 12:51 PM. Reason: top
08-15-2009, 04:25 PM
#10
Thread Starter
Join Date: Aug 2009
Location: oregon
Posts: 4
well ive thought about it just not sure what all i need to do any help would be great i know the motor,tranny,rearend but not sure what else to do. i was thinking of just cutting the unibody off the 89 but i really am stuck.
Last edited by moneywisher; 08-15-2009 at 11:50 PM. Reason: mistype