When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
no the max lift is .600 so a cam that doesnt go over that will do i was just stating that i didnt have to swap springs sorry for the miss conception.
so...
the ramp rates of an e303 with some 2:1 roller rockers (roughly .600" lift) and some wicked aggressive solid roller with ~.600" lift are identical right...?
and the fact that on wont pull 6000rpm and the other might reach 8000+ is irrelevant too?...
LOL SO im going a diffrent route... budget got cut from under me (wife) so i still wanna do the eagle 306 kit and find a good cam and heads...any ideas what would be a good budget set of heads??? and cam??? (im so new to mustangs it hurts... hope i catch on fast)