heads and cam

Reply Subscribe

Thread Tools

Search this Thread

03-07-2011, 03:58 PM

adshr

Thread Starter

Join Date: Sep 2010

Location: South dakota

Posts: 38

heads and cam

I am building a 302 and i am using edelbrock performer rpm 60229 heads with the 1.90 intake valve 1.6 roller rocker arms does anyone know of a good cam to run with these heads and what size of push rod to us.

03-07-2011, 05:56 PM

Venomantidote95

4th Gear Member

Join Date: Jul 2008

Location: alabama

Posts: 1,812

I can't remember what lift those flow there Max I think .550 so anything around that lift.

03-07-2011, 06:23 PM

adshr

Thread Starter

Join Date: Sep 2010

Location: South dakota

Posts: 38

will stock length push rods work

Last edited by adshr; 03-07-2011 at 06:41 PM.

03-07-2011, 06:40 PM

68CSTANG

3rd Gear Member

Join Date: Jun 2007

Location: Illinois

Posts: 816

Call a camshaft grinder and get an expert opinion. Give them your entire combination and what springs you already own.

03-07-2011, 09:20 PM

Venomantidote95

4th Gear Member

Join Date: Jul 2008

Location: alabama

Posts: 1,812

+1 im no expert but that is one of the main things they will factor in on grinding you an expensive camshaft! bet on it! plus your other engine components! you need to know alot of info to get a custom cam also!