are the e303 and the edelbrock performer plus cam the same the cam does anyone know. They both have 0.498 int./0.498 exh lift and Duration at 050 inch Lift 220 int./220 exh but the performer plus cam power range says idle to 5500 and the e303 says 2500 to 5500rpm

 

i'd say yes... peep out the trickflow stage 1 for a really nice mild cam though $179 msrp

http://www.trickflow.com/partdetail....t=TFS-51402000

 

Crane 2040 / E303 / Performer Plus are the same cam.

 

or you could do the stage 2 for just 10 dallors more

 

not without TW heads or a stock iron (which is an absolute waste of money)

 

well right now i have gt40p heads on the car but i am trading a set of rims for a new set of edelbrock performer rpm heads

 

wont make a difference, the heads are gonna either have or be very close to some PTV issues.

needs to be TW heads for it to work.

 

i have probe forged pistons and they are only the 1.90 intake valve and right now running a crane 2030 cam i am just looking for a different cam when i switch the heads