Clutch Install Question
Thread Starter
2nd Gear Member
Joined: Sep 2006
Posts: 265
From:
Clutch Install Question
Nick,
I just purchased a RAM HDX clutch and Steeda Clutch kit (cable, quadrant, firewall adjuster). I was thinking about doing the install myself with a friend who has done this before. While looking at your site I noticed you had a clutch install guide (http://www.americanmuscle.com/simple...h-install.html) that shows the process with a SPEC clutch. I have a couple questions though:
1. In the clutch I purchased, it says it comes with the "release bearing". Is this the same as the throw out bearing?
2. Does it come with the pilot bearing? I am reading that some kits for newer models dont, but not sure if this is something I need to order..
Below is the clutch I ordered:
http://www.americanmuscle.com/ram-hd...45-clutch.html
Thanks for the help!
I just purchased a RAM HDX clutch and Steeda Clutch kit (cable, quadrant, firewall adjuster). I was thinking about doing the install myself with a friend who has done this before. While looking at your site I noticed you had a clutch install guide (http://www.americanmuscle.com/simple...h-install.html) that shows the process with a SPEC clutch. I have a couple questions though:
1. In the clutch I purchased, it says it comes with the "release bearing". Is this the same as the throw out bearing?
2. Does it come with the pilot bearing? I am reading that some kits for newer models dont, but not sure if this is something I need to order..
Below is the clutch I ordered:
http://www.americanmuscle.com/ram-hd...45-clutch.html
Thanks for the help!
Former Sponsor
Joined: Jan 2008
Posts: 761
Nick,
I just purchased a RAM HDX clutch and Steeda Clutch kit (cable, quadrant, firewall adjuster). I was thinking about doing the install myself with a friend who has done this before. While looking at your site I noticed you had a clutch install guide (http://www.americanmuscle.com/simple...h-install.html) that shows the process with a SPEC clutch. I have a couple questions though:
1. In the clutch I purchased, it says it comes with the "release bearing". Is this the same as the throw out bearing?
2. Does it come with the pilot bearing? I am reading that some kits for newer models dont, but not sure if this is something I need to order..
Below is the clutch I ordered:
http://www.americanmuscle.com/ram-hd...45-clutch.html
Thanks for the help!
I just purchased a RAM HDX clutch and Steeda Clutch kit (cable, quadrant, firewall adjuster). I was thinking about doing the install myself with a friend who has done this before. While looking at your site I noticed you had a clutch install guide (http://www.americanmuscle.com/simple...h-install.html) that shows the process with a SPEC clutch. I have a couple questions though:
1. In the clutch I purchased, it says it comes with the "release bearing". Is this the same as the throw out bearing?
2. Does it come with the pilot bearing? I am reading that some kits for newer models dont, but not sure if this is something I need to order..
Below is the clutch I ordered:
http://www.americanmuscle.com/ram-hd...45-clutch.html
Thanks for the help!
-Nick
Thread
Thread Starter
Forum
Replies
Last Post
