lt1 camaro for mustang
#1
lt1 camaro for mustang
Im not 100% im gonna do this, im just tryin to see what I can get. The car is a 1994 chevy camaro z28 lt1. It has 119,000 miles, and still runs great. The interior is very clean w/ no rips or scratches. kenwood head unit. all gauges and ***** work great. no ses lights.The window tint is a lil purple, so its due for some new tint. Car was hit a few years ago at 110,000 miles in the LH fender area.so its a salvage.My dad owns a bodyshop, so we put it on the frame rack and took some measurements. There was no frame damage. We replaced the fender hood, fascia. About a year later I decided to paint it, and add stripes. Paint is catelina dream dupont hot hues. I get nothing but compliments on it. I also painted wheels, and threw some stripes on it. It has 6 month old falcon ziex tires w/ tons of tread. Also has tailight, turn signal black outs, and headlight covers.
Car is automatic, and shifts great. all fluids changed regularly, and the best synthetic fluids were only used.spark plugs, waterpump,optispark, coolant level sensor,02s were changed w/ ac delc oem.
Now for the mods.
Kn cold cai, pacesetter lts, ory pipe, magnaflow catback, taylor otvc plug wires, poly tranny, engine mounts,hypertech 160 thermostat, AIR, EGR blocked off(emmisions), gmpp lt4 1.6 roller rockers, lt4 valve seals, and lt4springs, throttle body airfoil,B&m tranny cooler,1le intake elbow, msd coil, strange 373 gears, eaton ls differential, all internals in rear end are new, racetronix 255lph feul pump, pcmforless tune.Had the car datalogged, and everything worked good. Estimated fw hp was 365 around 6200 rpm. The shifts are very firm and spin the tires very easily between shifts 1-2. I have never run the car, but from different info gathered it should be a very low 13 sec. 1/4. possibly 12s w/ slicks. For picks click the link Thanks for looking http://www.cardomain.com/ride/2489368
Car is automatic, and shifts great. all fluids changed regularly, and the best synthetic fluids were only used.spark plugs, waterpump,optispark, coolant level sensor,02s were changed w/ ac delc oem.
Now for the mods.
Kn cold cai, pacesetter lts, ory pipe, magnaflow catback, taylor otvc plug wires, poly tranny, engine mounts,hypertech 160 thermostat, AIR, EGR blocked off(emmisions), gmpp lt4 1.6 roller rockers, lt4 valve seals, and lt4springs, throttle body airfoil,B&m tranny cooler,1le intake elbow, msd coil, strange 373 gears, eaton ls differential, all internals in rear end are new, racetronix 255lph feul pump, pcmforless tune.Had the car datalogged, and everything worked good. Estimated fw hp was 365 around 6200 rpm. The shifts are very firm and spin the tires very easily between shifts 1-2. I have never run the car, but from different info gathered it should be a very low 13 sec. 1/4. possibly 12s w/ slicks. For picks click the link Thanks for looking http://www.cardomain.com/ride/2489368
#2
RE: lt1 camaro for mustang
somethin must be wrong w/ car domain. I can send pics, or video, anything upon request. Im lookin for preferably a modded 5.0 5spd. But ill consider anything
#3
RE: lt1 camaro for mustang
i have a 95 gt 5.0 im lookin to part with 90,000 miles. you have the lt1 correct?. where are you located
#4
Thread
Thread Starter
Forum
Replies
Last Post