I am looking for the 8 pin plug to go into the back of the Shaker 500 for the sub outputs. I replaced the standard headunit in my 06 with a Shaker 500 off of eBay (I know, people have a low opinion of it here, but I cant stand the non-stock look) and would like to hook up a sub or two in the trunk off of the actual outputs. Does anyone know where I could purchase this? Crutchfield seems to have the opposite of what I need.

If anyone knows where I could buy one of these, or if any Shaker-haters around here clipped theirs and would be willing to sell it to me, I would greatly appreciate it!

Thanks!

Brian

 

Ok, starting to make some headway (I've been up all night not feeling well, its nice to have a project). I found a reference to it on an F-150 forum who pointed me to this:

http://www.installer.com/item/displa...p?it=71-5520-1

I just thought I'd post this for everyone's reference. I doubt I'm the only one wanting to do this (hopefully). If someone has an idea on where to get one for under $28, I'm all ears. All I really need is the 8 conductor plug.

Thanks!

Brian

 

I would say use a line output converter, basically allows you to tap off the speaker wires to get an RCA output. Since you put in the shaker, they already have wired for the subs, I would try to tap off them, somewhere in this section someone posted the diagram for the stereo. Here is a link for a output converter.

http://www.circuitcity.com/ssm/Tsuna...oductDetail.do