Need your input fellas
#1
Need your input fellas
Ok Guys. Need some opinions. I have a SGM 2013 mustang....I currently have satin black stripes with red pinstriping on it. I have my calipers painted black and GT/CS in red lettering on it. I am going to be redoing it here in the next couple weeks since some is coming off. What I want to know is should I stay with this or go red calipers with black lettering. That will make the red pop a little more and will still stay with my color scheme...and be different than Shorhorse . Any help appreciated
#2
There's 35-40 years difference between you and Steve already plus another 6-8 inches of flowing locks, how much more different do you want?
To clarify, the caliper paint is coming/flaking off, or you're taking the stripes off for the same reason?
Throw out a third option, spend a lot of time and polish the calipers then do red gt/CS logo on it?
To clarify, the caliper paint is coming/flaking off, or you're taking the stripes off for the same reason?
Throw out a third option, spend a lot of time and polish the calipers then do red gt/CS logo on it?
#3
The stripes on the car are staying. No problems there. The black on the calipers are flaking off...not a lot just a couple small spots and I'm particular about them.
Not too in to the polishing. I like to eliminate all the chrome/silver components that I can. I have the black with red GT/CS logo on it now but it's same as steve's. Most people don't look that hard at it but at least if you are looking at our cars from the side there will be some difference.
Not too in to the polishing. I like to eliminate all the chrome/silver components that I can. I have the black with red GT/CS logo on it now but it's same as steve's. Most people don't look that hard at it but at least if you are looking at our cars from the side there will be some difference.
Thread
Thread Starter
Forum
Replies
Last Post