I'm trying to get some Wheel ideas for a '65 6 cylinder. I'n kinda limited because it still has the original 4 stud bolt pattern. I saw one that had some Konig wheels that looked really nice, but I went to their website and they didn't list the wheel that I saw. I've got wire hubcaps now. Anyone know of a sharp looking replacement?

 

wont mustang II wheels work? and i think they have an adapter so you can put any kind of wheel you want on

 

check these out
www.wheeladapter.com
http://www2.mustangsplus.com/catalog/21_wheels.pdf

 

no mustang 2 wheels nor foxboxy wheels will fit cause they share a different bolt pattern than the early 4-lug mustangs

 

It's possible to put 4 bolt to 5 bolt wheel adapters on so your wheel choices are better, but they are 2" thick and cost a 130 bux for a pair. I would also think the extra 2 inches would put stress on the four bolts and not be a safe thing to do, and would seriously limit the choice of tires. Think about adding the disc brake system to the front, and maybe either use the spacers on the rear, or put in the Versailles rear.
http://www.ezaccessory.com/4_Lug_Adapter_s/43.htm