I am finishing up the engine compartment and am about ready to start putting it back together. I saved everything and was thinking about just cleaning everything in the solvent tank but............ a fastener kit would be very nice indeed. I was looking at the one on Paddock for $209 and there was one on ebay for 289 -- what are the recommendations on fastener kits????? Can anyone share there experience????

Thanks!

 

when I did my engine and compartment, I used Mustangs Unlimited for the fastners and assorted clips, I was happy with their stuff. Jack

[IMG]local://upfiles/57804/F770EC612932466CA9D0CDC96146170E.jpg[/IMG]

 

so you went with individual items vs. a kit with all the fasteners bundled together?

 

alot of looks, nobody bought any of the "package kits"??

 

Yea, I bought pieces as I needed, and all the stuff I got from them was pretty good, most of the fasteners under the hood I stripped to bare metal with my bench grinder, using the wire wheel, with the bolts I clear coated them and the came out great, but the wire harness holders, they were all messed up and missing, so I had to buy them, and the washer bag, washer fluid line, stuff like that, but I am always running on a budget so if I can save a penny I will do it, and so far I have found many little tricks to do it and do it right, but if I had to I would definietly buy that whole kit from mustangs unlimited, I have been using them for years and I can't remember having any problems with there stuff

[IMG]local://upfiles/57804/2BEB67F8D3244B6194483D1C5FB76F04.jpg[/IMG]