3- Spd and parts Needed!!
#1
3- Spd and parts Needed!!
I am looking to convert my C-4 Auto to a 3-Spd Manual on my 1966 Mustang. I am for a Bellhousing,The clutch/Brake pedal assembly, and the rods and levers and the clutch and everything needed to do this conversion. It is far a 200 I'6 Engine so i will need that bellhousing. I will also do a trade. My C-4 Auto that works well, with all parts for your working 3-Spd with all parts. Please E-mail me at SVTMustang4Life@wmconnect.com
I also need a front windsheild for a 1966 mustang coupe. I live in the Delaware area if you have one please contact me.
I also need a front windsheild for a 1966 mustang coupe. I live in the Delaware area if you have one please contact me.
Thread
Thread Starter
Forum
Replies
Last Post
Jskeezy84
4.6L General Discussion
5
09-08-2015 01:40 AM
Figure8allday
4.6L (1996-2004 Modular) Mustang
6
08-22-2015 11:11 AM
Fast-Hands
5.0L (1979-1995) Mustang
2
08-19-2015 06:54 AM