are you saying you are going to use the t-5 bellhousing with the toploader.If so I'm interested if its posible cable clutch would be nice.

 

Did not get much done this w-e - I sand blasted the equalizer bar and did not find any damages on the welds

I am now struggling to get the plastic bushing on the engine side out - seems like there is no C clip only one solid steel ring ... so I am trying to losen up the support that is screwed on the engine body but not very accessible! I did take pictures but they do not come out very well

I also checked the clucth finger, and the motion range is very short ... so at the end of the, it really seems like I will need to drop the transmission ...