Some Body Problems.
Thread Starter
2nd Gear Member
Joined: Mar 2006
Posts: 445
From:
Some Body Problems.
Ever since the body shop put my hood back on after painting, it doest quite shut down all the way. The latch hits fine, but the back part towards the windshield has to be pushed down on each side for it not to look like crap, almost like the hood hinges are worn out. Is that whats goin on here?
Also, the driver side window wont go all theway up because it gets tight up at top and the handle just starts to spin with no grip. I can see there is plenty of spines left on the regulator ****, would a new handle fix this problem?
Also, the driver side window wont go all theway up because it gets tight up at top and the handle just starts to spin with no grip. I can see there is plenty of spines left on the regulator ****, would a new handle fix this problem?
6th Gear Member
Joined: Jan 2007
Posts: 5,469
From: AR
RE: Some Body Problems.
ORIGINAL: badazz68stang
Ever since the body shop put my hood back on after painting, it doest quite shut down all the way. The latch hits fine, but the back part towards the windshield has to be pushed down on each side for it not to look like crap, almost like the hood hinges are worn out. Is that whats goin on here?
Also, the driver side window wont go all theway up because it gets tight up at top and the handle just starts to spin with no grip. I can see there is plenty of spines left on the regulator ****, would a new handle fix this problem?
Ever since the body shop put my hood back on after painting, it doest quite shut down all the way. The latch hits fine, but the back part towards the windshield has to be pushed down on each side for it not to look like crap, almost like the hood hinges are worn out. Is that whats goin on here?
Also, the driver side window wont go all theway up because it gets tight up at top and the handle just starts to spin with no grip. I can see there is plenty of spines left on the regulator ****, would a new handle fix this problem?
Yukon Cornelius
Joined: Oct 2005
Posts: 11,812
From: deep in the heart of dixie GEORGIA
RE: Some Body Problems.
yeah sound like the handles is stripped out
also before u go and start adjusting the hood try removing the springs and see is it will close down flush is the hood aftermarket lots of times they are a little more flimsy and dont shut quite right maybe u need a set of low ttensions spring like we use on the glass hoods
also before u go and start adjusting the hood try removing the springs and see is it will close down flush is the hood aftermarket lots of times they are a little more flimsy and dont shut quite right maybe u need a set of low ttensions spring like we use on the glass hoods
Thread
Thread Starter
Forum
Replies
Last Post
