Classic Mustangs (Tech) Technical discussions about the Mustangs of yester-year.

Brake lights don't work

Thread Tools
 
Search this Thread
 
Old Apr 20, 2007 | 02:10 AM
  #1  
my67pony's Avatar
my67pony
Thread Starter
 
Joined: Dec 2006
Posts: 22
From: IOWA
Default Brake lights don't work

I have no brake lights. Tested bulbs and tested the brake switch. Both good. I have voltage on the wire going to the brake switch. If I turn on the emergency flashers ,they flash front but nothing totherear.If I short out the brake switch light with the emergency flashers on the fronts stay light(not flashing)but still nothing at allto the backs.Obviously there is no voltage to the rear bulbs. So how should I proceed to find the problem????????????
Old Apr 20, 2007 | 02:35 AM
  #2  
66GTKFB's Avatar
66GTKFB
5th Gear Member
 
Joined: Mar 2007
Posts: 2,623
From:
Default RE: Brake lights don't work

The trick is to get voltage out of the brake switch. Pull the connector off the brake switch and stick in a jumper in the connector (a paper clip will work) and check the brakes. If no luck there, you got a problem in the turn signal switch. There is another jumper trick you can try to localize the problem by disconnecting the connector that goes up the steering column and taking a known hot (from the disconnected brake switch) and sticking the other end with a probe into either the orange-blue stripe (RH brake) or orange- yellow stripe (LH brake) in the connector that goes to the car. If that works, it's pull the steering wheel and column time (replace the cable/switch assembly).
Jim
Old Apr 21, 2007 | 07:43 PM
  #3  
my67pony's Avatar
my67pony
Thread Starter
 
Joined: Dec 2006
Posts: 22
From: IOWA
Default RE: Brake lights don't work

Thanks 66GTKFB.
I tracked all my wiring good, right up to the turn signal switch.
This past winter I replaced the Turn signal cam with a kit. I remembered that when I was putting it back together a thin metal strip was left over. Thank God I kept it.That metal jumper strip fits in there sideways under the cam. Brakelights now work.
Old Apr 21, 2007 | 07:50 PM
  #4  
66GTKFB's Avatar
66GTKFB
5th Gear Member
 
Joined: Mar 2007
Posts: 2,623
From:
Default RE: Brake lights don't work

An exception to the rule - 'parts left out are not subject to failure'.
Jim
Old Apr 21, 2007 | 08:51 PM
  #5  
Soaring's Avatar
Soaring
I ♥ Acer
 
Joined: Oct 2004
Posts: 17,565
From:
Default RE: Brake lights don't work

Makes you want to slap yourself up side the head and call yourself a DA doesn't it? Been there, done that. Glad you got her fixed though.
Old Apr 22, 2007 | 01:19 PM
  #6  
kalli's Avatar
kalli
6th Gear Member
 
Joined: Oct 2006
Posts: 6,417
From: Cork, Ireland
Default RE: Brake lights don't work

sweet .... left over parts :-)
I'd never have solved this one ...

Kalli
Old Apr 22, 2007 | 02:33 PM
  #7  
66GTKFB's Avatar
66GTKFB
5th Gear Member
 
Joined: Mar 2007
Posts: 2,623
From:
Default RE: Brake lights don't work

There's another approach that sometimes works - 'when in doubt (or 'if all else fails'), read the instructions'. But that only works if you can read. That's not directed at any of the other posters in this thread.
Jim
Old Apr 22, 2007 | 05:54 PM
  #8  
kalli's Avatar
kalli
6th Gear Member
 
Joined: Oct 2006
Posts: 6,417
From: Cork, Ireland
Default RE: Brake lights don't work

reading manuals is for cowards only
Old Apr 22, 2007 | 07:17 PM
  #9  
66GTKFB's Avatar
66GTKFB
5th Gear Member
 
Joined: Mar 2007
Posts: 2,623
From:
Default RE: Brake lights don't work

That's why auto shops make so much money. They figured out a way to profit on ignorance, fear and superstition.
Jim
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ChampInSD
5.0L GT S550 Tech
13
Oct 2, 2015 04:55 AM
kdryan
2005-2014 Mustangs
7
Aug 21, 2015 04:01 PM
1st 4 eyed fox
5.0L (1979-1995) Mustang
3
Aug 15, 2015 02:16 AM
cody.hoeppner
General Tech
3
Aug 12, 2015 06:39 AM
cody.hoeppner
New Member Area
2
Aug 11, 2015 08:08 PM




All times are GMT -5. The time now is 02:54 AM.