I heard that... I saw (can't find it tho) where someone took that 2" aluminum pipe you mentioned and welded in a bung for the fan temp sensor. Supposedly this worked well because it balanced out the temp control of the intake thermostat.

 

ya your car is really nice you know if you want to give it away ill umm take it for you.

 

I was thinking about giving it away....

And thanks. Where are you located so I can deliver it to you? [8D]

 

OK.. I will raffle it off to the person who can guess how much I have spent on this project to the nearest $50. Tickets are only $200.00 each. Any takers?

 

hhaha i wish i had 200 buck but all my moneys going to parts and insurance

 

hhhhmmmmmm i figurin about 55k, young and dumb here

 

supersnake flare the ends of the pipe a tiny bit will help keep the hose on it. and they make both in kentucky whiskey and bourbon but bourbon can only be made in kentucky .

 

The problem is that there is no hose for this application. The original radiator (top to bottom flow) had the hose to the enginecoming out ofthe bottom center of the radiator. Now it is bottom Driver side. Nobody makes the hose. I will get it.

 

I have the inside almost done. I didn't take pictures, but all I have to do is vacuum and put in the front seats, front seat belts and glove box. After a radiator hose and a cold air intake,I will be starting this puppy.

 

im saying buy a couple hoses with alot of bends in it use the bends only and a piece of pipe for the straight. or just have some pipes bent to fit and use some rubber hose to hook it up to the radiator and water pump