Complete Re-wire??
1st Gear Member
Joined: May 2007
Posts: 100
RE: Complete Re-wire??
i bought ym complete painless system from mustangs unlimited, it was the cheapest place i could find it
i did a whole car harness and it took a few days, but it was alot easier then it appears to be, once you get the dash all up, your good, and alot of the wires, you dont need!
alot of my interior wires were for door lights and courtesy lights, which i only have a dome light
i did a whole car harness and it took a few days, but it was alot easier then it appears to be, once you get the dash all up, your good, and alot of the wires, you dont need!
alot of my interior wires were for door lights and courtesy lights, which i only have a dome light
Joined: Aug 2007
Posts: 5
RE: Complete Re-wire??
I recenty installed a painless wiring harness in my 67 convertible. It was not easy or painless but deffinately managable. You will need to add most of the termination ends. I found it helpful to use som of the original ends, also be carefull routing it through the firewall (easy to mistake the correct holes when under the dash). Be patient....
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
Dec 27, 2021 08:09 PM
