I am installing a new parking brake system. When I got the car it didn't have much of the parking brake system left. This is on my 67. Does anyone have a pic of how exactly the cable goes through the firewall? I mainly need the pic on the engine side, but both would be great too. I know there is a bracket on the engine side of the firewall that I will need to fabricate where the cable comes through the firewall. I just want to visually understand the proper route. There is also a cable bracket at the frame rail just before the front parking brake cable enters the crossmember for the transmission, right? I will need to fab this bracket too. Good times. Thanks!

 

I can take some pics tomorrow for you.

 

Great. Thanks!

 

Hope these are what you need. 1 inside and 1 firewall

[IMG]local://upfiles/69894/7425B1E15D604B27AB82AC575D216D59.jpg[/IMG]

[IMG]local://upfiles/69894/613F889F1B88494198E346DF34824A65.jpg[/IMG]

 

Those are perfect. Just what I was looking for! Thanks a lot BA MUstang for your time to get those. Now I can confidently finish that parking brake system this weekend.

 

Hey no problem. I was doing things to my car so i decided to take some pics.