steering box help
Thread Starter
Joined: Jun 2008
Posts: 2
steering box help
I have run in to a little problem I am hoping someone here can help me with. I can’t figure out how to disconnect the steering gear box from the shaft that comes through the firewall. I was hoping it would just slide out after being unbolted but that doesn’t seem to be the case. I want it out to investigate the large amount of play it has, and to paint the engine well. It is a 67 with manual steering. Sorry if this is a stupid question.
Thanks, Adam
Thanks, Adam
5th Gear Member
Joined: Sep 2006
Posts: 2,266
From: Australia
RE: steering box help
if its early 67 it will have the long shaft type where the steering column and box are one unit. have to take the whole lot out.
later 67s on had a coupling (rag joint) just above the box.
later 67s on had a coupling (rag joint) just above the box.
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
Dec 27, 2021 08:09 PM
daltron
5.0L GT S550 Tech
17
Apr 28, 2016 08:10 PM