Does anyone make a forced induction setup for classic stangs that is intercooled? the only one I know of is paxton and they don't make an intercooler for there kit. I would like turbo or supercharger it doesn't matter to me I just want it intercooled.

 

There is not much benefit to intercooling a supercharger, the compressor is belt driven.
And the extra plumbing to make the air go thru an intercooler is probably more loss than gain. It's much more efficient to put the air intake where it could get cold air, like thru a large hood scoop on a dragster.
A turbo is where you often see a intercooler. The compressor is driven by hot exaust gasses and alot of that heat gets transfered to the compressor impeller.

 

Is there a Turbo kit for 67-68 mustangs with a 302? non intercooled.

 

talk to CPRstreetmachines about turbo kits. there great, and ive heard nothing but good about the. cprstreetmachines.com, from there you can join there forum and ask away. there also occasionally on here...

 

you can fab one up by turning the manifolds backwards and making flanges and plumbing etc

 

It's not hard to make one fit ither of them. For a supercharger just put in a air to air one up front and plumb it in..

 

you can get an intercooler off of a volvo from the junkyard