pimp2303

how would i install one of these panels if it is fiber glass. do i have to cut out my old tail light panel and install it, or just put this one over with no cutting or welding.



here is the link to what i am talking about.
http://cgi.ebay.com/ebaymotors/MUSTA...d=p3911.c0.m14

andrewmp6

It goes over your stock one but that one is cracked and has no gas cap hole in it.I'd save up and get a kit from http://www.mustangproject.com/ they have led ones which are nice.

pimp2303

but how would the new lights bolt into it. and the one above i was just using it as to show what i was tlaking.

Timetravelinn

http://www.mustangproject.com/Produc...d-67de5c15facd
the mustangproject lights are pricey but the installation looks really simple and you can always go back to stock.


edit
the link didn't go to the picture I wanted but it's the 4th pic

pimp2303

this is interesting but do the kit bolt in or how does it work. im not to familiar with mustangs. so bare with me on the questions.

rmodel65

thats not the panel those are only the lights in that mustang project link

Timetravelinn

yeah with that kit you don't need the panel it's optional if you want a more molded in look

rmodel65

not in that link those are for a 65-66 car they have a flat panel with no curve

i have those lights on my 65