Classic Mustangs (Tech) Technical discussions about the Mustangs of yester-year.

i hate sap....ideas?

Thread Tools
 
Search this Thread
 
Old Mar 21, 2010 | 04:59 PM
  #1  
longlive289s's Avatar
longlive289s
Thread Starter
3rd Gear Member
 
Joined: Oct 2006
Posts: 934
From: Kirkland, WA
Default i hate sap....ideas?

so awhile back when i was gone i mentioned to my dad to take the mustang out and keep the fluids runnin thru her and not let her sit for months on end. he did this but forgot to put the tarp back on her when he was done.....thus this happens.



i got 3 brushes, nylon, brass, and stainless steel. nylon was to soft. brass seems to work if i scratch softly but still leaves a trace amount left. dont wanna use the stainless steel one since it will probably scratch the paint.

i've tried a bug, tar, and sap remover spray but that does squat. Any ideas short of hunching over the car for hours next weekend? other idea was swallow my pride and do a quick $400 maaco paint job (god help me). really really really dont wanna do that but worst case scenario.....

thanks in advance
Old Mar 21, 2010 | 05:29 PM
  #2  
rmodel65's Avatar
rmodel65
Yukon Cornelius
 
Joined: Oct 2005
Posts: 11,812
From: deep in the heart of dixie GEORGIA
Default

im gonna go with tree sap remover.....


also a razor blade will work but if youve never used it to remove pinstripes etc i dont suggest it
Old Mar 21, 2010 | 05:41 PM
  #3  
longlive289s's Avatar
longlive289s
Thread Starter
3rd Gear Member
 
Joined: Oct 2006
Posts: 934
From: Kirkland, WA
Default

as i said....the sap remover spray/gel doesnt do a damn thing
Old Mar 21, 2010 | 05:45 PM
  #4  
JMD's Avatar
JMD
6th Gear Member
 
Joined: Jan 2007
Posts: 5,469
From: AR
Default

Will rubbing compound and/or polish help?

Temperature may help you out some, try when it is warm and try when it is cold.

Maybe a "like solvent" will soften it up, like maple syrup? Just a guess....
Old Mar 21, 2010 | 06:14 PM
  #5  
Gun Jam's Avatar
Gun Jam
6th Gear Member
 
Joined: Dec 2005
Posts: 5,212
From: Hills of California
Default

I would try lighter fluid to attempt to soften or dissolve the sap.

If that doesnt work

Buy a wool polishing wheel with the velcro base to attach to a good drill. Get a medium cut compound and use highest speed on the drill use medium pressure and work a small section at a time. The heat / compound should remove the sap, scratches, and some paint.

Go over the section with a glaze like meguiars # 7 with a foam pad that will attach to the same base as the wool pad.

Then go over it with a wax.


Make sure the paint is as clean (dust dirt free) before doing any buffing / cutting.


-Gun
Old Mar 21, 2010 | 07:42 PM
  #6  
cmanf's Avatar
cmanf
3rd Gear Member
 
Joined: Dec 2006
Posts: 815
From:
Default

had that problem from a pine tree in my drive way a few years back straight rubbing alcohol and a rag got it off my truck with out any damage . Just wax it when your done it does strip it off.
Old Mar 21, 2010 | 08:02 PM
  #7  
1slow67's Avatar
1slow67
ROTM Moderator
 
Joined: May 2007
Posts: 8,158
From: AL
Default

What about Goo Gone?
Old Mar 21, 2010 | 09:40 PM
  #8  
hiboostwoody's Avatar
hiboostwoody
3rd Gear Member
 
Joined: Aug 2009
Posts: 723
From: Washington
Default

WD-40 usually works too. Just spray it on, let it sit a little bit and polish it off. Might have to do it a few times but it will work. Works great for removing sticker and decal residue too.
Old Mar 21, 2010 | 09:59 PM
  #9  
plainsman1876's Avatar
plainsman1876
2nd Gear Member
 
Joined: Jun 2007
Posts: 308
From:
Default

That suck bud I'm sorry,
Old Mar 22, 2010 | 12:49 AM
  #10  
tx65coupe's Avatar
tx65coupe
5th Gear Member
 
Joined: Dec 2008
Posts: 4,462
From: Texas
Default

That sucks. I can't believe its that bad. I would think that most of that would come off with just some good car soap and a soft sponge.

By the way don't cover your car with that cheapo blue tarp. They scratch the paint and they don't breathe at all so they hold in moisture. You can get a car cover for not much money.



All times are GMT -5. The time now is 06:07 AM.