Misc engine parts needed to convert 5.0 to 302
#1
Misc engine parts needed to convert 5.0 to 302
I'm looking for some spare parts I know you have laying around. I'm building a 5.0 for my 65 and need all the parts to make it fit as the original 289/302, as in, oil pan and pickup (front sump), timing cover (for fuel pump), distributor (may go pertronix or HEI), pulleys and brackets, etc. I know there's some details (pulley bolt patterns and such) but let me know what you have and we'll go from there. I'm finding parts here and there, but a boxful from one source would go much further.
#2
I'm looking for some spare parts I know you have laying around. I'm building a 5.0 for my 65 and need all the parts to make it fit as the original 289/302, as in, oil pan and pickup (front sump), timing cover (for fuel pump), distributor (may go pertronix or HEI), pulleys and brackets, etc. I know there's some details (pulley bolt patterns and such) but let me know what you have and we'll go from there. I'm finding parts here and there, but a boxful from one source would go much further.
#3
I'm looking for some spare parts I know you have laying around. I'm building a 5.0 for my 65 and need all the parts to make it fit as the original 289/302, as in, oil pan and pickup (front sump), timing cover (for fuel pump), distributor (may go pertronix or HEI), pulleys and brackets, etc. I know there's some details (pulley bolt patterns and such) but let me know what you have and we'll go from there. I'm finding parts here and there, but a boxful from one source would go much further.
#4
You never know 'til you ask. The last engine I got was $50 and just "laying around." I'm just betting on whether the one who has all this stuff I'm looking for will read this post!
Thread
Thread Starter
Forum
Replies
Last Post