maestro1024

What is torque spec for rocker arm on 6 cylinder?

I had my head off and am putting everything back together. But I don't see this spec in the book. It is an all one unit (no separate rockers).

Thanks in advance

Canary94GT

What do you mean by "all one unit (no separate rockers)"?

Mine has 12 rocker arms that slip onto the shaft and the only thing you torque down is the rocker arm assembly to the head.

I am pretty sure I have the numbers for that but not sure if that's what you mean.

maestro1024

On the V8 it has the separate pieces that look like tea pots.
These sort of pieces
http://www.cjponyparts.com/TRICK-FLO.../p/TF51400520/

I agree on the inline 6 the whole assembly just bolts onto the head. What I am asking (sorry if I wasn't clear) is what is the torque for that assembly to tightened on the head?

Thanks again

Canary94GT

30-35 ft-lbs is what I have for the torque spec of the rocker shaft assembly to the cylinder head

maestro1024

Thanks a bunch.

kalli

never have my shop manual with me at work. sorty. no matter what the torque, I'd probably use some threadlocker as well on that one