HELP REPLACING FIREWALL AND ENTIRE FLOOR!
2nd Gear Member
Joined: Nov 2003
Posts: 283
From: Connecticut
RE: HELP REPLACING FIREWALL AND ENTIRE FLOOR!
Still haven't forgotten, just waiting on a response from my freind, I'm gonna have to drive to his house and get them in person, he's not too good at answering his phone.
5th Gear Member
Joined: Sep 2005
Posts: 2,505
From: Wasilla, Alaska
RE: HELP REPLACING FIREWALL AND ENTIRE FLOOR!
Should a guy weld a brace from the front frame rail to the rear frame rail to keep things square while replacing floor pans? Is the rusted area that is left part of the firewall? That will be cut out also?
2nd Gear Member
Joined: Jul 2005
Posts: 215
From: Michigan
RE: HELP REPLACING FIREWALL AND ENTIRE FLOOR!
I have to undertake this big step too but wanted to know were you replacing any of the rocker panels(inner or outer)....mine need to be replaced and although i bought the floorboards i cant weld them in until i get the rockers put in.
Thread Starter
1st Gear Member
Joined: Jan 2006
Posts: 69
From: Manitoba, Canada
RE: HELP REPLACING FIREWALL AND ENTIRE FLOOR!
ORIGINAL: mustangdemon01
I have to undertake this big step too but wanted to know were you replacing any of the rocker panels(inner or outer)....mine need to be replaced and although i bought the floorboards i cant weld them in until i get the rockers put in.
I have to undertake this big step too but wanted to know were you replacing any of the rocker panels(inner or outer)....mine need to be replaced and although i bought the floorboards i cant weld them in until i get the rockers put in.
Thread
Thread Starter
Forum
Replies
Last Post
fastbackford351
Classic Mustang General Discussion
2
Sep 12, 2015 09:42 AM
