BBK twin 62mm vs Accufab twin 60mm throttle body
03-20-2006, 02:04 PM
#1
1st Gear Member
Thread Starter
Join Date: Mar 2006
Location: Austin, TX
Posts: 87
BBK twin 62mm vs Accufab twin 60mm throttle body
Hey,
I was looking around at new throttle bodies for my 2003 mach 1. I came across the BBK twin 62mm and the Accufab twin 60mm. Maybe a fellow mach 1 or cobra owner might have some experience here?
The BBK has a wider diameter, is much less expensive and says that it adds 8 to 10 horsepower.
The Accufab has a slightly smaller diameter, but is much more expensive and says that it adds 15 to 18 horsepower.
To me, it seems that a wider diameter would allow more airflow thus adding more horsepower. Can anyone point me in the right direction? There's about an $80 difference in the two, but I want whichever will make the ride more responsive.
I was looking around at new throttle bodies for my 2003 mach 1. I came across the BBK twin 62mm and the Accufab twin 60mm. Maybe a fellow mach 1 or cobra owner might have some experience here?
The BBK has a wider diameter, is much less expensive and says that it adds 8 to 10 horsepower.
The Accufab has a slightly smaller diameter, but is much more expensive and says that it adds 15 to 18 horsepower.
To me, it seems that a wider diameter would allow more airflow thus adding more horsepower. Can anyone point me in the right direction? There's about an $80 difference in the two, but I want whichever will make the ride more responsive.
Thread
Thread Starter
Forum
Replies
Last Post
