Is this an easy task? I figure it wouldnt be too hard to do and really dont feel like paying someone a bunch of money to install if its pretty easy. I should let you know im not experienced too much when it comes to cars so it will definitely be a learning experience for myself.

I figure so many have done this that I should get a fairly detailed reply on how to do it.

Thanks all

 

It fairly easy but it is very easy to break the clips that hold it in place, so be careful

 

There are no screws on the headlights , just 2 plastic clips and they are really tough, i just used the wood end of the hammer and pressed them in and they poped right out , (do inner first then outer )
as for corners there is 1 10 mm nut on the corners and then they jsut work out , reverse install and your done, took me 30 minutes to swap out from stock to projectors

 

This is a fairley easy task just look on the new head lights on the back and you will see where u need to look on your headlights in your car to take take off stuff and put on stuff!