Cobra Engine Swap
Thread Starter
Joined: Jul 2004
Posts: 7
Cobra Engine Swap
What all am I going to need to replace to put a 98 Cobra Engine in my 98 V6? I know this so far
* 98 Cobra Engine
* New Tranny
* 8.8 Rear End
* All wiring and computer
What else am I going to need or is that all that I would need?
* 98 Cobra Engine
* New Tranny
* 8.8 Rear End
* All wiring and computer
What else am I going to need or is that all that I would need?
I ♥ Acer
Joined: Apr 2004
Posts: 9,172
From:
RE: Cobra Engine Swap
Why do you wanna go with the 98 cobra motor? If you are going to spend the money, you would be better off going with the 03 cobra motor.
But that looks like the main things you will need. There are always little things here and there you will need to run to Autozone for.
But that looks like the main things you will need. There are always little things here and there you will need to run to Autozone for.
1st Gear Member
Joined: Sep 2004
Posts: 52
RE: Cobra Engine Swap
http://www.factoryfive.com/table/eng...2000%20Mustang
dunno what u would need but check out that link for a cobra motor...
dunno what u would need but check out that link for a cobra motor...
5th Gear Member
Joined: Mar 2004
Posts: 3,645
From: Northern New Jersey
RE: Cobra Engine Swap
I will take that 625HP racing motor. Quote from site "If you are seriously considering this engine, why not add a supercharger for good measure?" Heres one reason who the heck needs more then 625 HP in their mustang
. Well ME .
. Well ME .
Thread
Thread Starter
Forum
Replies
Last Post
YoungStangsMan
5.0L (1979-1995) Mustang
15
Sep 5, 2015 07:01 PM
