Door handle removal-help?
#2
RE: Door handle removal-help?
Common prroblem. Make sure you get the all metal
replacement (Blue Oval).
Raise the window.
Remove the two plugs on the armrest and the big screws.
Remove the screws on the arm rest and the armrest.
Un hook the wires .
With a stiff putty knife between the panel and door
slide to each holder and pry loose.
Lift the panel up to unhook it at the window trim.
Peel off the plastic behind the door handle.
Drill out the two pop rivets and handle will come out.
You can use bolts or LARGE rivets on the new handle.
replacement (Blue Oval).
Raise the window.
Remove the two plugs on the armrest and the big screws.
Remove the screws on the arm rest and the armrest.
Un hook the wires .
With a stiff putty knife between the panel and door
slide to each holder and pry loose.
Lift the panel up to unhook it at the window trim.
Peel off the plastic behind the door handle.
Drill out the two pop rivets and handle will come out.
You can use bolts or LARGE rivets on the new handle.
Thread
Thread Starter
Forum
Replies
Last Post
mungodrums
S550 2015-2023 Mustang
10
09-28-2015 10:54 PM
MustangForums Editor
General Tech
0
09-25-2015 06:58 PM
mungodrums
Suspension
0
09-24-2015 10:12 PM