S/C, harmonic balancer and tranny question
#1
S/C, harmonic balancer and tranny question
Aloha,
I have a 65 mustang with a ~70's 302 block and rotating assembly. How to I identify the 28 oz or 50 oz imbalane? It currently has a 3 bolt harmonic balancer on it with part number C5AE 8318A2, I don't currently have the intake off so I can't give valley castings. Does the block have an iden casting elswhere that can be seen externally?
Last question, I am installing a B&M 177 blower on this car, where do I attach my vacuum modulator from the C-4 tranny? And will my H code servo work any better than the in place A code servo I have in it now? I have had the tranny performance built with kevlar bands and worked valve body.
Thanks for the help.
dunnman99 at yahoo dot com
I have a 65 mustang with a ~70's 302 block and rotating assembly. How to I identify the 28 oz or 50 oz imbalane? It currently has a 3 bolt harmonic balancer on it with part number C5AE 8318A2, I don't currently have the intake off so I can't give valley castings. Does the block have an iden casting elswhere that can be seen externally?
Last question, I am installing a B&M 177 blower on this car, where do I attach my vacuum modulator from the C-4 tranny? And will my H code servo work any better than the in place A code servo I have in it now? I have had the tranny performance built with kevlar bands and worked valve body.
Thanks for the help.
dunnman99 at yahoo dot com
Thread
Thread Starter
Forum
Replies
Last Post
jessicarabbit
GT S197 General Discussion
12
09-25-2015 12:41 PM
LivingInThePast
Classic Mustangs (Tech)
2
09-16-2015 12:20 PM
jaiidutch
Motor Swap Section
2
09-14-2015 10:29 AM