Need help with my passenger side rear power window. Won't go up and down easily. Replaced the guide bushing in the bottom of the window bracket and greased everything. Someone's been in here before me so there's been damage or someone screwed it up replacing a broken glass. (I found a piece of broken window inside the panels). Whoever did the work did some pretty cheesey stuff so I'm betting they didn't put something back rightt.

So here's my first question, in the bracket that rides up and down the guide post is there supposed to be a guide bushing in the top and bottom sides? When I went looking for the part everything I read said one per side. I'm wondering if the PO put the bushing in the top when it should have gone in the bottom. Any ideas? Thanks,

 

Not sure on the bushings. Does the window bind? Can you hear the motor, and is it clicking? The gears in the window motors are plastic and strip easily, I have already replaced my motors once. You can rebuild the gears for less than 10 bucks, but I can find who has the link to the parts. Check out the Convertible sub forum under General Tech.