Changed heater core, now airbag module beeping??? WTF?
#1
Changed heater core, now airbag module beeping??? WTF?
So I changed the heater core on the 1996 V6 stang over the last couple days, I put it all back together today and now the airbag light is on and the module is beeping. When the dash came out 2 of the pins got bent going into the module, I straightened them out and harness plugs in fine to the module. I put the key in the ignition, turned it to run and immediately the module started beeping. It beeps about 5 times and stops, then starts shortly after. I checked all of the airbag connections and they are all plugged in and seem secure. Any advise is appreciated!
THANKS!!!
THANKS!!!
Thread
Thread Starter
Forum
Replies
Last Post
LivingInThePast
Classic Mustangs (Tech)
2
09-16-2015 12:20 PM
TfcCDR
V6 (1994-2004) Mustangs
1
09-14-2015 12:08 PM