are all the driving lights on the GT and the V6 the same?

my car didnt come with the lights but i just ordered brand new GT driving lights. they should fit right in that hole correct?

110. bucks for the whole set with the housing and everything.

 

Driving lights? You mean the light bulb for the headlights? If they are size 9007, then they should be compatible for all mustang models (i.e., V6, GT, Cobra, Mach). The same goes to the turning light bulb, which is a size 3157. Whenver you buy parts for your vehicle, it's best to buy parts designed to directly bolt on your mustang. You don't want to buy parts for a 1997 mustang model and place it on your 2002 mustang. Its simply doesn't work!
S2H

 

The fog lights will fit perfectly in the V6 spoiler, but you have to cut out the plastic grill/bars. The only hard part is hooking up the electrical for the average person. I am an electrical contractor, so it's second nature to me, so I would recommend NOT giving the fogs their own circuit or switch. Just splice into the headlight wires so they go on automatically with the headlights. After you make your connection and everything works, electrical tape the splice connectors or use liquid tape which I use all the time because it's the best way to seal out moisture. Good luck.

 

If u want me 2 install them BabyGurl bring them by.

 

ok thanks im gonna be over one day this week.

im gonna PM ya with my number k ?


thanks Booze.. you are always a big help too