AEM's Plug-N-Play Engine Management System 30-1401
05-07-2008, 08:35 AM
#1
Thread Starter
Join Date: Aug 2007
Location:
Posts: 1
AEM's Plug-N-Play Engine Management System 30-1401
Does anyone in this forum have the AEM EMS for 94/95 Mustang. How do you like it? Do you have any pro/con opions of the system? Or any suggestions for engine managment for my project? I really don't care for the EEC IV with a pigback setup.
Also looking for the best header for the TF High Port heads.
This is for my project 94 GT 427 (part anyways)
Naturally aspirated 427 Dart, 230-234/ 114 cam, 10.7 cr, TF High Port, TF 90mm MAF, Accufab 90mm TB, TF R-series 90mm, 36lb injectors, T56 Viper 6 speed, 4:10 rear gear, etc. at 7,000 ' elevation, Nitrous later.
Thanks for any help.
Also looking for the best header for the TF High Port heads.
This is for my project 94 GT 427 (part anyways)
Naturally aspirated 427 Dart, 230-234/ 114 cam, 10.7 cr, TF High Port, TF 90mm MAF, Accufab 90mm TB, TF R-series 90mm, 36lb injectors, T56 Viper 6 speed, 4:10 rear gear, etc. at 7,000 ' elevation, Nitrous later.
Thanks for any help.
05-07-2008, 10:36 AM
#2
3rd Gear Member
Join Date: Nov 2007
Location: Venice, FL
Posts: 912
RE: AEM's Plug-N-Play Engine Management System 30-1401
I have one, but have not hooked it up yet. I will not be hooking it up till i get a manual trans in it. Atm I have a auto, and I have hear that the AEM does not work well with the auto's and it likes to burn them up alot. I have heard that they are prety good in manuals thought.
Thread
Thread Starter
Forum
Replies
Last Post