problems with my cobra swap
i just did a cobra swap on my 98 gt the engine came from a 97 cobra . i got the whole wiring harness transmission ecu exhaust except the rear end. im having problems like the engine is to shaky which might be from a hose that i dont know where it goes its near the intake. also it doesnt feel fast at all could it be that im using the stock rear end and its not tune? does any one have any one have any suggestions?
shaky...when? at idle, acceleration, deceleration??
Check your vacuum lines make sure they're all connected correctly. (yeah that one you have flopping arround under the hood could be the problem.
Id get a good quality picture of a matching motor and compare the pic to what you see under your hood.
Check your vacuum lines make sure they're all connected correctly. (yeah that one you have flopping arround under the hood could be the problem.
Id get a good quality picture of a matching motor and compare the pic to what you see under your hood.
Thread
Thread Starter
Forum
Replies
Last Post
Cannibal_carnies
Motor Swap Section
3
Mar 2, 2023 06:17 PM
Diode Dynamics
Vendor For Sale / Group Buy Classifieds
28
May 26, 2022 12:02 PM
rocket22
4.6L (1996-2004 Modular) Mustang
0
Aug 28, 2015 07:08 PM




