Clutch Position to start 2007 Shelby Gt
08-09-2008, 04:32 PM
#1
Thread Starter
Join Date: Jul 2008
Location:
Posts: 36
Clutch Position to start 2007 Shelby Gt
On the 2007 Shelby GT, and probably all 5 spd Mustangs,the clutch must be depressed to engage the starter. Unfortunately, mine must be mashed almost all the way to the carpet to start it! Does anyone know how to adjust this switch. I am assuming it is external, on the steering colume like the brake light switch. Help is greatly appreciated.
Best/ Bill
Best/ Bill
08-09-2008, 08:16 PM
#2
RE: Clutch Position to start 2007 Shelby Gt
ORIGINAL: 51derrill
On the 2007 Shelby GT, and probably all 5 spd Mustangs,the clutch must be depressed to engage the starter. Unfortunately, mine must be mashed almost all the way to the carpet to start it! Does anyone know how to adjust this switch. I am assuming it is external, on the steering colume like the brake light switch. Help is greatly appreciated.
Best/ Bill
On the 2007 Shelby GT, and probably all 5 spd Mustangs,the clutch must be depressed to engage the starter. Unfortunately, mine must be mashed almost all the way to the carpet to start it! Does anyone know how to adjust this switch. I am assuming it is external, on the steering colume like the brake light switch. Help is greatly appreciated.
Best/ Bill
The Clutch Pedal Position (CPP) switch is at the top of the clutch pedal. i don't know how much "adjustment" in physical position can be made to it. you might just have to get a replacement CPP switch, yours may be faulty? C257 is the part number in the wiring diagram, and at NAPA they're 34$ ECHNS5874
hope this helps...
Thread
Thread Starter
Forum
Replies
Last Post
bryan616fl
4.6L (1996-2004 Modular) Mustang
10
01-25-2019 09:07 PM
