General Tech Ask model specific questions in the appropriate category below. All other general questions within.

changing wire harness and need help.

Thread Tools
 
Search this Thread
 
Old Aug 31, 2008 | 08:17 PM
  #1  
luvs_stangs's Avatar
luvs_stangs
Thread Starter
 
Joined: Aug 2008
Posts: 3
Question changing wire harness and need help.

Usually i can always find what I am looking for in the forums but not this time.
Here's what I have going on. I have a 05 V6 stang that i have change the look of my V6 to look like the GT. I'm working on the wire harness now and have run into trouble and cant figure it out on my own and need help.
This is what I am doing and whats not working. i went and purchased a foglight, headlight wire harness so i can have working fog lights and the GT light switch. I have put everything on and I dont have working fog lights. I have checked everything out once, twice and three times and I have juice to the fuse box but not to the foglight wires. I have head lights, running lights and park lights but not fog lights.
I would appreciate any response I can get. I am lost and dont know which way to turn right now.
Any suggestions from anyone????
Old Aug 31, 2008 | 08:46 PM
  #2  
MustangMike2001's Avatar
MustangMike2001
4th Gear Member
 
Joined: Sep 2006
Posts: 1,164
From: Nashville, TN
Default

You need to test for voltage with a multi meter to see where the power dead ends at.
Old Aug 31, 2008 | 09:31 PM
  #3  
luvs_stangs's Avatar
luvs_stangs
Thread Starter
 
Joined: Aug 2008
Posts: 3
Default

Here is what I have done so far. there is power into the fuse box, power to the light switch and everything else except for fog light wires. I have tested the sockets and I have nothing to the fog lights but I have all other lights. Makes no sense to me and I have been working on this since Friday evening with no luck. do you know if there is a relay of some sort from the fuse box to the light switch?
Old Aug 31, 2008 | 10:24 PM
  #4  
luvs_stangs's Avatar
luvs_stangs
Thread Starter
 
Joined: Aug 2008
Posts: 3
Default

I checked the voltage on everything and the one thing I could not get to move on the voltage meter was the fog light indicator. What is that????? and where can I trace this to.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bryan616fl
4.6L (1996-2004 Modular) Mustang
10
Jan 25, 2019 09:07 PM
mmbrown
4.6L General Discussion
2
Sep 8, 2015 01:29 AM
Stilz
Motor Swap Section
0
Aug 18, 2015 09:40 AM
$A_Money$81
V6 (1994-2004) Mustangs
1
Aug 11, 2015 01:30 PM
Pain.
5.0L (1979-1995) Mustang
1
Aug 7, 2015 10:48 PM




All times are GMT -5. The time now is 11:53 PM.