My 2000 V6 is showing the following errors. Any info on what I need to do to correct will be appreciated.

P0411 SEC Air Inject
System incorrect flow

P1414 SEC Air Inject
Monitor Ckt high input

 

You need a new pump. Very common problem. Remove the pump hoses and check to see if water comes out.

 

Thanks. Took me forever to find where they mount the dam thing. Fin ally found it under the right front mudguard. Will put it on the ramps this week and check the pump.

 

I pulled the same code about a month ago. I just disregarded it and reset the light everytime it came on. Last week it came on, and shut itself off before I could reset the light, and it hasn't come back on. Check the lines to the diverter valve, and check to see if the pump has water in it.

 

Many thanks also Bud!!! I had that p1414 code as well!! I found a pdf up here with the code meanings!! this should help out someone that needs it!!