Power Steering hose routing
02-02-2009, 09:02 AM
#1
Thread Starter
Join Date: Feb 2009
Location: Arkansas
Posts: 1
Power Steering hose routing
Hello,
I am re-installing P/S on my '68 302 Automatic Mustang. It had been abandond by past owner. Since I have nothing to work from, and my shop manual does not help, I have 2 questions.
The control valve on the drag linkage. I marked where the old manual one came off, and installed the rebuilt one. Should it be installed to 2.5 inches from Ram knuckle?
P/S hoses should be routed how? One article shows a big block , but is it different for a small block?
Thanks,
John Williams
I am re-installing P/S on my '68 302 Automatic Mustang. It had been abandond by past owner. Since I have nothing to work from, and my shop manual does not help, I have 2 questions.
The control valve on the drag linkage. I marked where the old manual one came off, and installed the rebuilt one. Should it be installed to 2.5 inches from Ram knuckle?
P/S hoses should be routed how? One article shows a big block , but is it different for a small block?
Thanks,
John Williams
Thread
Thread Starter
Forum
Replies
Last Post
TfcCDR
V6 (1994-2004) Mustangs
1
09-14-2015 12:08 PM
