General Tech Ask model specific questions in the appropriate category below. All other general questions within.

Air Flow

Thread Tools
 
Search this Thread
 
Old Jun 26, 2005 | 02:48 PM
  #1  
95stangergt's Avatar
95stangergt
Thread Starter
 
Joined: Feb 2005
Posts: 37
Default Air Flow

thinking about getting an air intake but i dunno what to get. any advice? worth it?
Old Jun 26, 2005 | 04:21 PM
  #2  
92hatchLX's Avatar
92hatchLX
6th Gear Member
 
Joined: Feb 2005
Posts: 8,439
From:
Default RE: Air Flow

Don't get a cold air intake, it isn't worth it. Get a K&N panel filter, remove the mesh screen in your MAF, and remove your air silencer. Also if you have the equipment go ahead and cut a larger hole in your fenderwell, you can use a sawz-all or something like that. CAI are mostly used for the sound that they produce and eye candy, other wise the stuff that I just told you to do can flow just as much and sometimes more than a CAI, and plus everything up there, besides the K&N, is free stuff that you can do.
Old Jun 27, 2005 | 01:46 AM
  #3  
fordguy17's Avatar
fordguy17
4th Gear Member
 
Joined: Nov 2004
Posts: 1,538
From: Charleston, SC
Default RE: Air Flow

what he said. aluminum cai can heat up and heat the incoming air.
Old Jun 27, 2005 | 03:02 AM
  #4  
razarr69's Avatar
razarr69
2nd Gear Member
 
Joined: May 2005
Posts: 459
From:
Default RE: Air Flow

yeah they look sweet but id go wit tha other dudes. wus tha air silencer n where is it? i got a CAI n i wanna take it out, n how do i take tha screen outta my mass air flow sensor?
Old Jun 27, 2005 | 10:19 AM
  #5  
AtlanticBlue99's Avatar
AtlanticBlue99
I ♥ Acer
 
Joined: Nov 2004
Posts: 1,369
From:
Default RE: Air Flow

well you have to remove the MAF to install your CAI so reverse the process and the screen will fall out of the MAF when you remove it. it is circular....
Old Jun 27, 2005 | 11:04 AM
  #6  
Chopper's Avatar
Chopper
5th Gear Member
 
Joined: Feb 2004
Posts: 2,028
From:
Default RE: Air Flow

If you remove the screen,be sure to replace the rubber gasket that is around it or you will cause an unfiltered air leak.Just pull it off the original screen and replace it in the intake.
Old Jul 2, 2005 | 02:10 AM
  #7  
95stangergt's Avatar
95stangergt
Thread Starter
 
Joined: Feb 2005
Posts: 37
Default RE: Air Flow

so then what is the next upgrade i should do for my car?
Old Jul 2, 2005 | 04:02 AM
  #8  
PipsBlackStang's Avatar
PipsBlackStang
4th Gear Member
 
Joined: Jul 2004
Posts: 1,133
From:
Default RE: Air Flow

Well a Supercharger of course!
Old Jul 2, 2005 | 10:57 AM
  #9  
stanglx2002's Avatar
stanglx2002
6th Gear Member
 
Joined: Feb 2005
Posts: 5,205
From:
Default RE: Air Flow


ORIGINAL: 1991_5.0_Convertible

Don't get a cold air intake, it isn't worth it. Get a K&N panel filter, remove the mesh screen in your MAF, and remove your air silencer. Also if you have the equipment go ahead and cut a larger hole in your fenderwell, you can use a sawz-all or something like that. CAI are mostly used for the sound that they produce and eye candy, other wise the stuff that I just told you to do can flow just as much and sometimes more than a CAI, and plus everything up there, besides the K&N, is free stuff that you can do.
agreed

as for your next mod what do you have done to the car
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
daltron
5.0L GT S550 Tech
17
Apr 28, 2016 08:10 PM
Lethaldosage423
Archive - Parts For Sale
1
Oct 19, 2015 12:12 AM
Dokilar
4.6L (1996-2004 Modular) Mustang
15
Oct 16, 2015 08:13 PM
bradleyb
California Regional Chapter
0
Oct 1, 2015 01:02 AM
1996cobraconvertible
SVT Forums
3
Sep 30, 2015 02:01 PM




All times are GMT -5. The time now is 11:51 AM.