General Tech Ask model specific questions in the appropriate category below. All other general questions within.
Sponsored by:
Sponsored by: DashLynx

engine losing power

Thread Tools
 
Search this Thread
 
Old 09-09-2010, 07:57 PM
  #1  
juggalo785
Thread Starter
 
juggalo785's Avatar
 
Join Date: Sep 2010
Location: ks
Posts: 2
Default engine losing power

I have a 98 mustang v6. I am having some major lose of power issues. First I will start with everything I have replaced and then go from there. I have replaced the air filter, new k&n filter, new ignition coil, new wires, new plugs, all motorcraft, new oil and filter, new fuel filter along with brakes and suspension parts. The problem I am having is any time I run the ac the car will lose power after I have stopped. Car will run absolutely fine going down the road with ac blowing cold, but as soon as I stop, even if only for 5 seconds, the car loses all power, it will struggle just to get above 10 mph. Its not over heating, the compressor is not locking up, but I just have no clue. Anyone have any advice or suggestions?
juggalo785 is offline  
Old 09-12-2010, 11:22 AM
  #2  
19stang88
3rd Gear Member
 
19stang88's Avatar
 
Join Date: Jul 2009
Location: SoCal
Posts: 807
Default

have you checked for codes?
19stang88 is offline  
Old 09-13-2010, 05:32 AM
  #3  
juggalo785
Thread Starter
 
juggalo785's Avatar
 
Join Date: Sep 2010
Location: ks
Posts: 2
Default

Yes I have. There are no current, pending, or history codes.
juggalo785 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
djbigskrilla
2005-2014 Mustangs
24
09-20-2022 01:04 AM
ShaneB26154
4.6L (1996-2004 Modular) Mustang
35
03-04-2021 04:05 AM
Gary Ugarek
4.6L (1996-2004 Modular) Mustang
63
12-11-2015 02:01 PM
cardsrus1
4.6L (1996-2004 Modular) Mustang
19
09-15-2015 08:37 AM
Jacob4589
5.0L (1979-1995) Mustang
3
08-08-2015 11:00 AM



Quick Reply: engine losing power



All times are GMT -5. The time now is 09:53 PM.