which intake manifold is best for the 2v 4.6 nitrous setup? proven hp as well as experiance of the product would b helpful.. herd of the elderbrok and trickflow let me no appricate it

 

Honestly, if you have stock heads and cams, the stock intake is your best bet. You'll have no issues if you have things setup right. I've been running my nitrous setup with the stock intake for 3 years and haven't had any problems.

 

here are my current mods. bored .30 over,manley forged pistons + rings, scat forged h-beam rods,stage 2 ported pi heads, manley nex tec springs, custom grind stage 2 comp cam, kook long tube headers,bbk x-pipe,flowmaster exhaust,4.10 gears,90 shot of nitrous,upr cold air intake,70 mm accufab throttle body.. just recently purchased 42lb injectors, 90mm maf and bbk alum under drive pullys.. i am still in need of an intake manifold was wondering what to buy i am going to spray a 100 or 125 shot. also my fuel rails and coil wires what to do about them as well. i appricate all the help thanks