General Tech Ask model specific questions in the appropriate category below. All other general questions within.

Problem Shifting into 2nd

Thread Tools
 
Search this Thread
 
Old Aug 26, 2005 | 01:20 AM
  #1  
Grandmaster's Avatar
Grandmaster
Thread Starter
1st Gear Member
 
Joined: Apr 2005
Posts: 102
Default Problem Shifting into 2nd

89, 5.0, T5tranny.

I can shift into all gears at any rpm fine except 2nd.

I have to let the engine idle go down in order for 2nd not to grind. I tightened my clutch cable but it made no difference. I can start out in second fine, no vibration or grinding. but i cant launch and go from 1st to 2nd at all. Gears are spinning too fast.

any ideas.
Old Aug 26, 2005 | 01:58 AM
  #2  
ckthecerealkiller's Avatar
ckthecerealkiller
2nd Gear Member
 
Joined: Sep 2004
Posts: 293
From:
Default RE: Problem Shifting into 2nd

You need to get the synchro's replaced. Basically a tranny rebuild.
Old Aug 26, 2005 | 05:50 AM
  #3  
Grandmaster's Avatar
Grandmaster
Thread Starter
1st Gear Member
 
Joined: Apr 2005
Posts: 102
Default RE: Problem Shifting into 2nd

****ty, i just did that at the beginning of summer
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Pyrate Dave
5.0L (1979-1995) Mustang
8
Sep 10, 2015 07:30 PM
Mustangmalo
General Tech
2
Sep 6, 2015 05:22 PM
5.0 kevo
5.0L (1979-1995) Mustang
6
Sep 3, 2015 06:24 PM




All times are GMT -5. The time now is 05:08 AM.